FPGA NES and Famicom Solutions' Mapper Support Matrices

There have been several hardware devices released over the past four decades which play NES and Famicom games.  Any regular reader of this blog will know that the NES and Famicom have many, many different ways in which it supports memory management.  Hardware devices which support a wide variety of games use FPGAs to configure their logic to handle the various memory mappers used by NES and Famicom games.  Below I will give matrices of each device and identify the mappers it supports.  Both iNES 1.0 and NES 2.0 mappers will be identified.  None of these devices support UNIF format mappers and UNIF should be fully deprecated by NES 2.0 now.

Review of Products Three for my Apple //e

A minimally-functional Apple //e requires very little in the form of upgrades.  Add an 64KiB memory expansion, a floppy disk controller card and a disk drive or two and you should be all set.  But a few upgrades can really improve the experience, and to allow my Apple //e to be the best Apple //e it can be, I purchased three modern upgrades for my newest vintage computer.  Here I will review each product, describe its features and caveats and indicate whether I recommend it.

Apple II - Classic Games and Resources

When I re-started my Apple II journey I wanted to share some of the knowledge I had acquired over the years and put into full service when I began to build my Apple //e system in October.  For me, an Apple //e is a gaming machine, and there are lots of great games for the system.  I will discuss some of them first, then give links to more information which I have found helpful for Apple II users.